Often a situation arises - when the steam generator is working, the consumer does not receive steam at the output. There are several reasons for such a nuisance; by defining them, you can deal with some on your own. The main thing to know is how to find a breakdown and fix it correctly.
Steam generators are available for use in various fields. It can be powerful industrial steam generators, equipment for domestic needs and for electronic cigarettes. Regardless of the size, the main malfunctions are the same, it can be either in this case the steam supply is interrupted, or water flow from a steam generator. We will analyze them using an example of a household appliance for steaming laundry.
The most common causes of such breakdowns of steam generators may be:
- the formation of scale and limescale, this leads to the use of plain water in the boiler;
- poor contact;
- shedding of the inner coating of the para-generator, such a breakdown can occur on budget, mainly Chinese devices with low-quality parts;
- failure of electronics, in this case, only the specialists of the service center will help or the purchase of new, better equipment.
We will analyze in more detail each cause and solution to the malfunction.
Scale or limescale
Many manufacturers, in advertising their products, indicate the possibility of pouring plain tap water into the boiler. Such an opportunity is available in some regions where water from a water supply system has a low salt content. But even under such conditions, scale builds up on the walls of the boiler and the steam outlet pipe over time, which impedes the normal operation of the steam generator.
In most devices, according to the instructions, it is necessary to fill in distilled or filtered water, but most housewives do not follow this recommendation. Therefore, there comes a time when the channels for the passage of steam are clogged with scale or alkaline deposits and steam cannot pass through them. Solving the task of rectifying the situation is simple. To do this, the steamer is cleaned of plaque using special industrial or folk remedies.
Both the advertised “Kalgon” and simple citric acid will cope - the choice remains with the mistresses of the steam generator. The product is placed in a boiler, and purified or distilled water is poured into it. By turning on the device, the mixture cleans the surface of the channels and the walls of the tank. Thus, the simplest processing of channels from scale is performed. After that, all parts are washed with water and the device is ready for operation.
Large formations of alkaline plaque may require contacting a service center for disassembling and washing parts.
See also: How descale iron with steam generator?
Deformation of the coating of the inner surfaces of the paragenerator
He will turn to specialists, it will be necessary in case of shedding of the surface layer of the coating, the inside of the boiler and channels. Such a breakdown leads to clogging of the steam exit channels. In this case, it is better to entrust the work to specialists. Required disassemble the steam generator and clean the boiler and channels of particles. It may be necessary to replace expensive parts, in this case, it is more profitable to buy a new device or turn in the device if it is under warranty. But you should not again buy an affordable and unreliable Chinese steam converter and re-encounter a similar problem.
If the steam generator does not supply steam, you should check the contacts and the entire electronic operation control circuit.
If the appliance works, but no steam comes in, in this case, if there are no professional skills, there is a direct road to specialists. The device is working. Then at once the steam ceases to go, at a high temperature of water.You can solve the problem, but you will need to disassemble the equipment case and dial the multimeter of the entire electrical network. Perhaps it just burned out contact, but this is the easiest option for failure.
More serious problems will arise when the electronics of the generator and individual control units fail. Such a breakdown will require financial costs and expertise. The thermal relay, pump, other parts and devices of the generator may fail.
The smell of burning wiring will require the cessation of operation of the paragenerator and contact the repair shop.
On the forums you can find more extravagant, but, according to consumer reviews, effective methods to combat the breakdown of the steam generator. To do this, the idle device is connected to the network and the power button is pressed. Now, disconnect the plug from the outlet without turning off the button. By inserting the plug again, steam can be generated in the generator. The method is not scientific, but people write that it is effective.
In conclusion, some tips to help buyers of steam generators.
Going to the store, every buyer should understand that cheaper equipment cannot be of high quality and durable. Cheaper materials and components can lead to a quick replacement of a broken para-generator. Buy better products from trusted manufacturers.
Be sure to pour distilled water into the boiler, such care prevents the formation of alkaline deposits. At the first manifestations of a serious breakdown, the device must be disconnected from the network and left to cool. Do not try it yourself, eliminate a serious breakdown - this will lead to unnecessary parts after assembly and more serious problems. Replace the descaling cartridges immediately after the indicator lights up.
Choosing a reliable, high-quality steam generator and responsibly serving it - you increase the period of trouble-free operation of the device.
What kind features of a steam generator with a boiler, you can find out the link.
Hello, please tell me the BIEFFE FARINTLLI steam generator when you turn on the heating key, as I understand it, the boiler emits a squeak, the pump does not pump water. In general, it does not turn on.