Repair and adjustment of the door in the dishwasher

In the dishwasher is always a mountain of dirty dishes. It is convenient for a large number of housewives to wash the dishes only when they accumulate a lot, because in this way less detergent is used. Every time you need to put dirty dishes in the washing hopper, you have to open and close the doors of the machine.

Let us think about how the return spring acts on the door when it constantly tries to close. Therefore, you need to hold the door, and with your free hand put the dishes in a container. This is quite dangerous, because if you do not hold it, then you can beat all the dishes or injure the limb. Why is the door constantly closing? Could this be a structural disruption or a malfunction? What to do, how to fix the breakdown? There is always a specific answer to each question.

Possible dishwasher problems

When the service of your equipment exceeds five years, then you should think about simple wear of parts. However, in the case when the equipment was recently purchased, then various dishwasher malfunctions may be caused by the following factors:

• Cheap models often have low-quality details;
• Severe clogging of the plates can cause clogging of the filters, after which no water will pass. Before loading, it is necessary to clean dishes from food residues well;
• Poor cleaning possible due to the use of low-quality detergents;
• If the door is not closed tightly, it will become noticeable how flowing dishwasher. It also happens that the door does not close well, and this indicates its incorrect installation by the manufacturer;
• Has the meaning proper utensil loading: the upper compartment is for cups and plates, and the overall tableware is placed down.

In a situation where the above reasons are not suitable, you should think about the bad details that can fail.

Door lock

Dishwashing machines are designed so that the door always locks in any position. However, our question is that there is no fixation. Thus, to fill the washing machine with dirty dishes, you will need to hold the door with your knee so as not to beat the dishes and neatly place it.

Often in such a case, the system for fixing the door itself fails. However, it also happens that incorrect adjustment can lead to improper operation of the mechanism. This is because built-in dishwashers not supplied by the factory with the door already adjusted. This is necessary so that the master can easily install it.

The mechanism that is responsible for fixing

To deal with the fastening of the dishwasher door, you need to look inside where it is attached. There you can see:

• Special spring;
• Cable;
• Locking element for locking, which consists of plastic;
• Noose.

The hinge begins to move as we fully open the door of the machine. To open it, you need to make a certain effort, which is quite enough to maximize the spring. The locking element fixes the cable so that the spring is not pulled back, thereby keeping the doors open. They will remain in that position until you close them yourself. The lock is immediately removed, which will lead to compression of the spring, which will pull the cable.The door must be held, because it will be attracted by a spring, so it will slam shut quickly.

Assume a situation where the blocking element is broken. In such a case, you must constantly hold the door so that it does not return to the closed position due to the taut spring. It will take constant effort to be open while loading dishes. In the event that the locking device is out of order, the operation of the dishwasher door is not permissible. Otherwise, the mechanism will completely break, which will ultimately lead to a serious repair.

What is the essence of the repair?

In the event that there is no fixation of the door of the dishwasher, you can try to adjust it. When this recommendation does not help, then repair dishwasher. It will take some action that will not be difficult.

It is necessary to fully open the door and substitute something so that it remains in this position for the duration of the work. After that, you need to remove the screws that are installed on the inside. As soon as the screws are unscrewed, it becomes clear that the door consists of two halves, between which the mechanism itself is located. When the half that is installed on the inside is removed, you will immediately be able to access the mechanism.

It is necessary to loosen the spring for a while so that access is constantly open and nothing interferes. The cover that is mounted on the cable needs to be removed. Then you need to dismantle the broken blocking element, and then install a new one. An already broken device cannot be restored in any way, so you can simply throw it away.

After the installation of the new locking device is successful, you can check the door's progress. Initially, it is required to hold the cable along with the spring, which will make it possible to check the opening and closing of the door, and also to see how it will behave when opening, whether it will hold by itself. When all the work has been completed and verified, you can reassemble the structure in its original form, after which you can easily use your equipment.

The reasons for poor fixation with the doors open were revealed, however, breakdowns can be different, and therefore their symptoms are different.

• An arbitrary opening indicates that the spring has burst. But often the problem is a broken cable. It is required to determine one of the reasons, and then simply replace the obsolete part with a new sample;
• Due to poor locking, it is not possible to start the wash. The problem is a failed device that locks the door. It is best to replace the part with a new one. On progressive devices in case of poor blocking, an error is displayed on the panel to notify about the need for repair work;
• The smudges on the door became visible. This indicates the need to replace the sealing gum;
• Squeaks are heard. It is worth paying attention to the hinges, there are cases that they need lubrication for silent operation. It also happens that they need to be replaced when their damage is visible.

Self-adjusting the doors of the dishwasher is often even for housewives. But in the event of a serious breakdown, it is best to take the help of an experienced specialist.

Also you can find: how to attach the facade to the dishwasher, thereby fitting it into the interior of the kitchen?