Error code F59 in the Bosch washing machine

If an error with code F59 appears on the Bosch typewriter display, then the self-diagnosis system has fixed a problem with the 3D sensor. 3D wash is a unique Bosch product found in some models of this manufacturer. While most washing machines rotate laundry in a two-dimensional plane, a special design with a 3D system twists the laundry in three dimensions at once. So the laundry is evenly distributed throughout the drum and does not fall into areas where the contact with the powder or washing liquid is too small for effective cleaning. Thus, the laundry is better washed and rinsed faster.

But even the most advanced technologies do not exclude the possibility of error. The described code is a prime example.

How to reset the error on the display?

In some cases, the cause of the problem may be a malfunction in the control system. In order to reset the error, you need to restart the washing machine. Disconnect it for a quarter of an hour, and then turn it on again and try to start any program. If the code no longer appears, then the problem is solved by itself.

What needs repair?

It is difficult to cope with such malfunctions independently. If resetting the control module does not help, contact a specialist. The wizard will be able to identify the problem and help solve it. Most often, the following components require replacement or repair:

• The wiring that powers the 3D sensor, and especially the contacts;
• Firmware for control board - washing machine software;
• Loop control board.