IE error code in the LG washing machine

When you put dirty laundry in the tank and start standard programs, your unit does not show any signs of proper normal operation. And after a certain standby mode, the IE malfunction is displayed on the screen. Occasionally, your unit will turn on the pump for a very long period of time and try to pump water. And the result is the same, it is not enough for the washing process in the tank, and on the LCD you see the same IE code. Sometimes the mistresses of the machine believe that I is the usual number 1, so there may be a combination of 1E.

If the model of your device does not have a display, then you can determine such a breakdown by blinking or glowing indicator lights, which are responsible for all washing modes, including the preliminary one.

IE Cipher Combination Value

IE error notifies you that the device did not complete the task and did not pump the required amount of water during the time set by the manufacturer. Such a malfunction can be as a result of your carelessness, or due to serious breakdowns, which only a professional can fix

IE Problem How To Fix It Without Repair Wizard

• There is no water supply. If you have a central water supply, then there may be a decrease in pressure, or even a lack of water. Water supply will be restored, then the machine will work again.
• Inadvertently, you might forget to open the direct feed tap, which is installed in front of the machine. Open it.
• The head is reduced or you may not have fully opened the tap, and its throughput does not allow the pump of the unit to pump the required amount of water to carry out the corresponding program. Check the valve that is installed to supply or shut off the device. Open it all the way.
• Look at the special hose mounted on the back wall of the equipment through which the feed is made, so there should be no bends or kinks on it. Eliminate bumps on it.
• If at the entrance to the unit there is a special filter (mesh), then it could become clogged. And then there will be neither pressure nor the corresponding amount of water per wash cycle. Remove and clean the mesh, rinse in a solution of citric acid. Cleaning the filter will result in uninterrupted operation of the device.
• The simplest failure is the banal failure of the automation responsible for controlling the machine. To fix it, you need to unplug the cord for up to 20 minutes. After this procedure, connect the power supply and the device will work properly.

About fault value F22 in the Bosch washing machine, You can read by clicking on the link.