Cleanliness is the key to health and applies not only to personal hygiene, but also to shaving accessories. An individual approach is required for each subject: how to clean the razor from hair ─ the basic rules for the care and cleaning of the device.
Learn how to clean your shaver without breaking the rules
Modern industry has introduced to the market a wide range of devices for removing unwanted hair. Shaving is always the most popular method of hair removal at home. The ideal shaving tool selection is a very important point, since the entire shaving procedure depends on the device. An important factor is knowledge: how to clean a razor from hair?
Basic Razor Care
Of all the razor accessories that provide a pleasant and clean shave, the main groups of razors can be distinguished. These include dangerous, safe and electric razors. They require proper and timely care, which extends the tool life.
- Dangerous. In order for the tool to always be in an “acute” working state, the care requirements for the device must be observed. Under the influence of moist air and water, the blade may rust and oxidize. A razor requires regular editing called honing. Sharpening is carried out using special abrasive products.
Find out how sharpen your shaver yourselfin our article.
Options for sharpening the fear:
- Artificial or natural water stone, which must first be wetted with water. The stone must be large so that the blade rests on it completely. The thumb and forefinger hold the caution and lead the stone alternately on the side of the blade. First, from yourself, then turn over and lead to yourself ─ the rules of one sharpening stage. It is not necessary to apply great pressure, it is enough to adhere to the contact of the tool with the stone.
- Donkey (ceramic hone). The apprehension blade can be sharpened with a wet or dry donkey. They are not large, but the result is excellent.
- Fine sandpaper. This is a cheap sharpening method, it requires frequent replacement of abrasive material. You can also use finely divided stone, which sharpen knives.
Note! It is imperative that the pressing force on the blade on both sides of the blade aisle is the same. Only in this case it will turn out sharp and even. And for better preservation of the ridge, experts recommend sealing it with electrical tape.
After honing, the dressing is carried out with the help of a leather belt or linen. The leather belt is rubbed with GOI paste, and chalk serves as an abrasive for flax. The blade should lie flat on the tensioned belt. Otherwise, a bending of the edge will occur. After the correct editing, the dangerous razor makes a peculiar sound.
- Safe. The tool does not require complicated maintenance. That he served as long as possible he still needs to be respected. Every time after shaving, the razor blade must be thoroughly washed with hair. This must be done under strong water pressure so that all dirt is removed from all inaccessible areas of the tool.
About all advantages and disadvantages of a t-razor read in our article.
The blades must be carefully monitored and not allowed to remain in the wet state for a long time. Water can be attributed to the enemies of the razor, but you can not do without it.To prevent corrosion on the blade, after each washing, it must be well dried. To do this, use a hairdryer, towel or alcohol lotion, which serves as a disinfectant.
The razor does not like moist air, so it is not recommended to store it in the bathroom. To keep the blade sharp and without microcracks, it is recommended to lubricate it with baby or essential oil.
- Electric. Designed for personal use and requires regular care. Only improper care can cause the shaver to break.
Basic Electric Shaver Care
- Read the instructions;
- After each shave, remove the remaining hair from inaccessible places with a brush;
- Disassemble the shaving unit twice a year to remove dirt;
- After cleaning, do not confuse the places of movable and fixed pairs of knives;
- For shaving razors, use detergents while washing electric shavers under running water;
- Dry all the details;
- Replace shaving parts every year.
With the dry method of using a razor, you need to disconnect it from the network and remove the cutting unit. A special brush is used to clean the internal mechanisms. Then all the parts of the device are assembled into place.
Observing all the rules for caring for razors, they allow you to feel comfort on the skin for a long time during shaving.
How to clean a razor from hair
During shaving, the accumulation of cut hair occurs. This makes shaving difficult, skin irritation and poor shaving. The question arises: how to remove cropped hair?
Cleaning the razor from the hair can be divided into methods. It depends on the type of shaving device.
- Professional. One click on the button will turn the razor into a new tool. Some shaving accessories in the design have cleaning blocks. It is only necessary to press a button and it will clean the device of hair, dry the internal mechanisms, and also charge the shaving device.
- Manual. This is a purification under running water. For the best effect, experts recommend using a small amount of detergent. And the razor can easily be freed from the unnecessary presence of hair. This method is suitable for razors that support wet shave.
- Brush. Some razors come with a soft brush, which is a cleaning agent for the electric razor. It is used for dry shaving. To clean the device from hair, a knife head is removed with cutting parts that are wrung out from the corresponding mount. Hair removal will occur by tapping gently on the back of the appliance or using a soft brush. Then all the elements are installed in their original places.
It can also be noted: how can hair be removed from a dangerous razor? The method is very simple. While shaving, hang a waffle or terry towel nearby and gently wipe off any dirt that forms.
Therefore, observing all the rules for the care and cleaning of shaving structures, you can achieve effective functioning for a long period.
Learn how to get rid of unwanted hair with male shavers for intimate areas.