Do it yourself conditioner

Many people ask the question - is it so easy to make an air conditioner yourself, with your own hands? Often this applies to those Russians who live in the southern regions. But Russia is very large and in almost every city there are at least a few weeks of this summer. The sultry heat, sunshine and even shadows that can be found at home will not help you feel better.

All this creates excellent conditions for the growth in popularity and demand for air conditioners, as well as their prices. Sellers know that just can not do without such a technique in the hot summer. Therefore, many are looking for a way out of this situation. The room can be cooled with air conditioning, which is made at home. This is an excellent solution and most importantly - less expensive, several times.

The essence of the most simple do-it-yourself air conditioners

DIY air conditioning - the basic principle of operation and varieties

One of the easiest do-it-yourself air conditioning methods

Heat has always existed, and before the problem was solved in different ways. Someone used cold towels that needed to be placed on the neck and forehead of a person. There was also a very interesting method - its basis rested on physics and the rule of evaporation. A simple bottle was wrapped with a wet towel and placed in a through place, the process described above and the room were cooled, as a result.

There was also an interesting option with a simple fan and several chilled bottles. This process can be seen in the picture above. Almost every country has its own method and method, but all of them cannot replace the air conditioner in the end. It is better to use a simple fan, which will give minimal cooling. You should not try rare methods, it can be life threatening.

How to create the simplest air conditioning? To make it, you need only a few simple elements:

1. A pair of simple bottles.
2. Ice water is poured into each, which is frozen.
3. A simple fan.
4. A wire that is used as a fixture for bottles.

In Russian realities, this method is suitable for those who do not want to understand and study cooling systems, as well as waste their time. The following steps need to be done:

• Freeze water in at least six two-liter bottles.
• We place them side by side and fold them like a pyramid, put on a pallet and tie.
• We leave the front of the fan, but so that water does not get into the mechanism.
• Turn on.

By this principle, all simple air conditioners are created. There is always an element that carries with it cooling and a second object, it already performs the function of spreading the desired coolness. The main advantage of this method is reusable, cheap price, as well as instant and easy assembly. Even a child can cope with such a task.

Copper hose and tube option

A simple and convenient DIY air conditioner

Such a device, made at home, can bring the desired cooling for a very long time. The creation procedure itself is quite simple and will not cause any complications.

To do this, you need to have several basic components with you:

1. Garden hose, the best option is rubber.
2. A few thin copper tubes, ideally one, but very long.
3. Fan, dimensions do not matter.

You can achieve the desired temperature in minutes using such an air conditioner.Its advantage is in cheap parts, often only a tube and a hose are purchased. Well, the availability of such elements speaks for itself.

To make such a device, you do not need to have any tools or knowledge, our instructions are enough:

• We form a radiator from a copper tube, which should repeat the shape of the radiator grille of the fan. We do this so that there are gaps for air flow and the elements do not block access.
• When everything is ready, it must be carefully secured and done tightly. So that the structure holds well.
• We attach one side to the tap with cold water.
• The second is sent to the drain. It should be dimensional, because the water will flow constantly.
• We turn on the tap with ice water and at the same time do the same process with a fan.

Done, the ideal DIY air conditioner that does not require installation. The handset will keep the temperature cold, and the fan will carry cold throughout the room. It is very cheap and more than effective. The main thing is to think over the drain well, because the flow of water should be constant.

Variant with container, ice and cooler

DIY do-it-yourself air conditioner

Heat exchangers, resistors, amperes - unknown words? They are not needed, because this is the simplest version of a great home-made air conditioner. The essence of his work is similar to all previous methods and consists in a cooling element and a distributor. But this option is more compact, the operation is simple and clear, the direction of action is better.

The search for details will not cause difficulties, you need to purchase several elements:

1. A small container made of plastic, the volume is not more than two liters. Often, food is stored in such boxes, but any option is suitable.
2. A simple cooler. It can be disconnected from the computer power supply, use the old one or buy the cheapest one. Power does not matter, the main thing is that the cooler is working.
3. Plastic siphon, necessarily corrugated.
4. Stationery knife.
5. Gun with glue.

As you can see, this method requires more extensive tools. The creation itself is also more complicated, but the final result will be very pleased. Such an air conditioner can be carried, and this is an extremely important advantage. Some craftsmen take it with them to work or to the garage - now a person is not attached to the house.

Instructions for creating such an air conditioner:

• Make a small hole in the container lid. Its dimensions should almost coincide with the fan, be a little smaller. The hole is not located in the center, but from the very edge.
• We put the cooler on top and check its operation. The bottom line is that air should be drawn into the container. When the system is set up, you need to use a gun with glue and gently fix the elements.
• On the other hand, we make a new hole, there will be a corrugated siphon in it. We cut it with a clerical knife, we do everything carefully, in good conscience.
• Cut off about 30 centimeters from the siphon and glue it into the lid with a glue gun.
• Open the container and fill it with ice, fresh, only from the freezer.
• Now you need to close the cover and connect the fan to the power supply.

The ideal portable DIY air conditioner is ready to use! It weighs a little, can be easily transported and work for a long time. The main thing is to constantly change the ice that will melt, that’s the whole secret. This option is more complicated in comparison with previous methods, but also has better efficiency. A lot of users tested it on themselves and everyone is very satisfied.

Air conditioning from the refrigerator

To create a small portable refrigerator was used.

This option is the most difficult of all of the above. For him, you need to have a lot of tools, as well as technology. If you are not ready to understand the instructions, then choose any of the above methods.But this particular air conditioner is the most effective in terms of cooling. Many say that there is practically no difference with the real units, this plus makes you take up the job.

Almost everyone has an old and unnecessary refrigeration unit. It can be an excellent basis for creating an air conditioner with your own hands. If you do not go into details, then this is a universal unit. It can be easily called a real air conditioner, because the principle of operation is almost the same. It consists in the transfer of heat through freon and the evaporator to the condenser.

You need to have several pieces of equipment with you at once:

1. As many as 2 fans, best of all small ones. Although it all depends on the desired size. Perhaps the refrigeration unit is large.
2. Plastic tube, we select the length, starting from the first point.
3. Jigsaw, which can deal with metal sawing.
4. A small amount of mounting foam.
5. Old refrigeration unit.
6. Glue.

As you can see, acquiring all this on your own is not very profitable. Therefore, the option is interesting to those who have at least half of these tools. Often these are fans and a refrigeration unit, which have long been littered in a garage or on a cabinet. You should not immediately run to the store and buy them if there is nothing necessary with you. Although, in any case, this option will be several times cheaper than a simple air conditioner. And the effectiveness is almost the same.

We make the conditioner from the refrigerator:

• We drill a small hole for the fan directly in the door of the refrigeration unit. Dimensions again depend directly on the size of a particular technique. We need to calculate everything.
• We install the fan in the door so that it blows air in. We fix it with glue.
• Next to the first hole, do the following. It will be responsible for the release of cold air from within the structure.
• We insert a plastic tube into the second hole.
• We close the cracks with the help of mounting foam, we do everything carefully.
• The second fan must be installed so that it faces the condenser. This will allow heat to be removed several times better.
• We turn on the refrigerator, and then the fans, we start cooling the room.

This is an ideal version of a portable and compact air conditioner with your own hands. If everything is done according to the instructions, it turns out an excellent home-made device. It has good power and is a good substitute for a real air conditioner. In the presence of a refrigeration unit, spending will be minimal. If everything is available - start creating such an aggregate right now!

Creating climate control - do-it-yourself screen for the air conditioner

The essence of the screen - change the air flow

Screen for air conditioning - can I do it myself? The baffle is used on most air conditioners and is an excellent method of avoiding the subcooling process. This often happens when the unit is turned on. A person must be under him, so office workers are at risk. In an apartment, air conditioners are placed further and higher from such places, but there are exceptions.

In which case you need to install a deflector:

1. If the employee’s workplace is directly under the air conditioner. This also applies to the option with a home office, when the workplace is in front of the unit.
2. Sometimes the air flows disperse in one direction, and the air conditioner starts to work incorrectly. It cools only one part of the room, not the entire room. The deflector helps to adjust the waves, they begin to move around the room.
3. If the air conditioner is above the bed, and the air blows directly into the face.
4. After rearrangements in the apartment, a common problem is that the air conditioner never blew directly at people, but now it has begun to do so.

In other words, the screen can make your life safer and create indoor climate control.With a deflector, its efficiency increases, while it uses the same amount of energy and works similarly.

A simple screen can cost more than $ 100, because it is made from expensive and high-quality plexiglass. Therefore, you can easily create a similar replacement for the deflector.

Tools:

1. Scotch.
2. Cardboard sheet.
3. Scissors or a knife that needs to cut a shape.

In extreme cases, you can use plain cardboard. You need a large sheet without damage. You can use the part from the box in which household appliances are placed. The length of the sheet is always illogical to the same indicator of the split system.

Across the sheet you need to stick tape, its length is slightly longer than the cardboard itself. This is done specifically so that the screen can be fixed to the split system housing. We clean most of the sheet for duct tape. Do not use gasoline or alcohol. Degrease the body and stick the adhesive tape, well pressed to the structure. That's all - the screen is ready and made of all the most simple, improvised materials.

You can use plexiglass, but in this case, the cost will not differ much from the purchased deflector. Does it make sense to do this process yourself? No, it’s better to trust professionals than spoil a large and expensive plexiglass due to inexperience. Such a screen can be easily hung on a makeshift air conditioner, this will help create climate control in the apartment.

The only exception is that its dimensions will be very different, because homemade units are often smaller and have other forms. But this is not a problem, you just need to cut the shape out of cardboard. We select it according to the dimensions of a home-made air conditioner. The meaning of the installation is almost the same, but still depends on the materials.

Total

Is it worth it to do the air conditioning yourself? Undoubtedly, given the rising prices for this technique. Moreover, it is constant, every year it only gets worse. In recent years, there has been a tendency to create designer air conditioners. That is, according to the characteristics, they will not provide anything unique, but visually - they are selected according to a certain style in the room. This has increased prices several times.

Also, air conditioning cannot be portable. Using a simple container or an old refrigerator, you can make a compact unit that will be compact. All you need is a power outlet for the air conditioner to work. Most options are very easy to create and will not cause any difficulties for an adult male.