Today, to ensure the greatest comfort during the summer period, air conditioning is used - a device that cools the room. Thanks to this device, the desired coolness is achieved.
But sometimes there is a problem when using this technique. The fact that water always flows from the air conditioner is a normal process, but only when it flows to the right place. During operation of this device, continuous condensation occurs. Moisture is located on the plates of the heat exchanger, after which it begins to drain into a specially designed bath. From a special bath, moisture is discharged through the drainage hose. But there is a chance that the drain hose will become clogged. Then moisture will begin to drip from the internal unit of the device. Moisture can form a decent puddle. Under the air conditioner, there may be other equipment or paper, which will lead to unpleasant consequences. Air conditioning is flowing, what should I do? Why is this happening?
In order not to encounter this problem, you must:
- Choose the best place to install this unit.
- Perform timely preventive maintenance of equipment.
Do not wait for the moment when the air conditioner starts to flow, it is better to clean it in advance. These two steps will help you avoid problems.
Reasons and solutions
Flowed air conditioning, what is the reason? Consider other possible reasons why the air conditioner may leak. There are a lot of reasons:
- A hose designed for drainage may not be sloped or raised up. Because of this, moisture will begin to accumulate in the compartment and drip from the indoor unit. The end of the drainage hose can be lowered into the water, while condensate collects in the tank or the same thing can happen during drainage drainage as in the previous case. Therefore, you need to install a siphon. The drain hose should not be too long. This requires accurate calculations, so for help you can contact the specialists who will perform the installation of the device.
- Another reason is that the drainage pump may fail. All cassette air conditioners have drainage pumps. Also, some channel device models also have this element. Another name for this element is the pump. Installation of the pump on domestic air conditioners is carried out if the customer so desires. Thanks to this, you can create communications behind a suspended ceiling. Communications include a hose, tubes and wires. The cleaning procedure of the apparatus includes mandatory prevention of the drainage pump.
- Perhaps the freezing of the heat exchanger of this unit occurs. Frost appears on the device. This happens if the fan breaks. The fan speed is simply not enough.
- The person himself can be to blame for this problem when he turns on the device for cooling, and at this time the temperature outside is negative. Because of this, the condensation that forms in the hose intended for drainage starts to freeze. Due to the fact that the condensate freezes, an ice plug forms. The result is water flowing into the room. If you plan to use air conditioning in the winter, then you are installing a winter kit.
If the air conditioner is dripping, what are the solutions to this problem? Let’s take a closer look at ways that can help fix this problem. They are suitable for independent work:
- The first method includes the following: it is necessary to pour condensate from the tank that has accumulated. After this procedure, reinstall the container. At the end of this process, the split system will continue to function normally. Before work, be sure to turn off the equipment. Carry out continuous condensate monitoring.
- If a leak occurs because the heat exchanger is covered with ice, it is important to insulate. The material for thermal insulation may be glass wool. This is done in order to avoid the reaction that occurs due to temperature changes.
- In a situation where the drainage pump or pump breaks down, it is necessary to repair it or just make a replacement. Only a specialist will cope with this task. They will make a diagnosis and repair it qualitatively.
- If the drain hose has an incorrect slope, change it.
- What if the problem is loose fittings? It can be strengthened, this can be done with the help of nuts. Additionally, processing is carried out using sealant. Do not clamp until the thread breaks.
- Regularly process the amount of fluid so that excess cannot accumulate. The split system will then not flow and will accept a working state. Air conditioning will be restored.
These are fairly simple ways to solve this problem, you can cope on your own. Only in some cases will the help of specialists be needed.
Recommendations
There are some comments and tips from professionals that you should listen to. According to experts, one of the most common problems is clogging of the drainage tank. Anything can fall into the tube: from dirt to insects. Water attracts insects. Therefore, you can install a mosquito net on the end of the tube. But she, too, eventually gets clogged.
It often happens that water can drip from the hull. The man himself is to blame. This can happen during the repair of a room when the air conditioner needs to be moved to the right, left, up or down. Due to such movements of this device, a change in the angle of inclination of the drainage can occur, which leads to leakage of water indoors. Therefore, it is better to use the help of service wizards (after-sales service), because you should drill a hole and re-perform communication relocation.
This article examined all the possible reasons due to which there is a leak in the air conditioner or water remains in the compartment. But there are ways to help eliminate some of the causes on their own. The main thing - do not forget from time to time to carry out preventive measures to increase the life of the device.