11 best wood hacksaws

What are the differences between a quality and a bad hacksaw? Low quality can be seen on weakly sharpened teeth. Sometimes manufacturers cheat, and make the teeth seem sharp, but after a few works they become dull. A good hacksaw, on the contrary, is made of such steel, which will hold sharpness for a long time. The review compiles a rating of the best hacksaws for woodwork, indicates the features of choice and function.

Destination

The main goal of a hacksaw for wood is to cut wooden materials. Canvas, prongs, handle included. The canvas is a working part of the tool. Sawing wood is divided into several types. The first is the division into parts of dry materials, that is, boards, logs, plywood and other rubbish. The second type is pruning the garden, ennobling other trees. The following materials are also processed:

• bars;
• laminate flooring;
• Chipboard;
• plywood;
• polystyrene;
• aerated concrete;
• foam concrete.

Criteria for choosing a hacksaw for wood

When choosing you should be guided by the following criteria:

• the size and shape of the teeth, as well as the length of their stride;
• handle configuration;
• what material can be sawn (oak, cherry, brushwood);
• web length.

The comfort of work will be influenced by the shape of the handle. This parameter is the main one during intensive studies. To avoid grating calluses, use gloves.

Web Length and Size

The average length of the canvas is from 350 to 600 millimeters. The choice depends on the thickness of the tree you plan to saw. Try to choose an average length. For example, if you saw with too short a blade, then spend more time on cutting, and if it is too long, it will begin to spring after half the distance traveled.

The length should be 2 times the diameter of the workpieces. In this case, the minimum thickness of the workpiece should be a step of three teeth.

Tooth size and shape

The whole process of work depends on this parameter. There are hot / non-hardened teeth. Unhardened cloves can always be sharpened if the owner has certain skills. Red-hot teeth are more reliable. After wear, sharpening is not possible.

The teeth are divided into small, medium, large.Cutting speed / accuracy - this parameter determines the degree of wood cutting efficiency. High precision provides a small tooth. To quickly cut materials, a large tooth is perfect, but accuracy and quality will suffer.

For products of the smallest sizes, teeth from 2 to 2.5 mm in size are used. They provide high precision cutting.

Medium-sized teeth have sizes from 3 to 3.5 mm. Large teeth can cut logs. Their length is from 4 to 6 mm.

Differences in incisors in appearance

There are several types of wood hacksaws. They are determined by the appearance of the teeth:

• Performs the functions of longitudinal sawing. Such teeth are used to cut trees along the fibers. The teeth will be in the shape of an oblique triangle.
• For dry wood use a cross hacksaw.
• Triangular teeth are suitable for rare use. These teeth change regularly with semicircular. Suitable for mixed wood sawing.
• For a high speed of operation, it is recommended to purchase a saw with teeth in the shape of a trapezoid. The owner will cut it quickly and not get tired.

Design

The design comes in many different configurations and sizes. So, such structures are distinguished:

• Narrow - they saw small workpieces that have a thickness of not more than 10 mm. Curved parts and branches in the garden are also cut. A canvas with narrow triangular teeth is installed here.
• Standard hacksaw. Any teeth can be installed. They are equipped with removable sets of paintings. It is convenient when performing carpentry.
• Hacksaw equipped with a blade, protected from strong bending.
• The hacksaw with an award has two handles. A bit like a planer. Designed for cutting grooves in wood.
• The canvas in the form of an arc is presented on a hacksaw-type hacksaw. It helps a lot where you need to make complex cuts.
• Folding hacksaws with small teeth are suitable for outdoor enthusiasts. They are rated positively by tourism / fishing enthusiasts. They differ from other types in lightness / compactness. Outwardly resembles a folding knife.

Other types:

• Garden hand saw.
• Two-handed file for two people (transverse).
• Hiking chain saw.
• Electric saw.

Handle type

This parameter determines the usability of the tool. If the handle is made of two parts, then the use will be less comfortable, since it does not have a sufficient level of rigidity.

Universal or hand saws are equipped with cross over handles, where a blade change is required during operation. Next, consider which hacksaw for wood will be better.

Popular models

The best new models of wood saws are presented below.

Gross Piranha 24 106 450 mm

Quality hacksaw at an affordable price. It can be purchased for 900 rubles. The model is equipped with a fixed handle. It features hardened teeth and a Teflon coating.

It has the following advantages:

• 3 D sharpening.
• It processes wood, laminate and polystyrene foam.
• Rubberized grip.

The blade length is 450 mm, and the pitch is 11-12.

Gross Piranha 24 106 450 mm

BLACK + DECKER BDHT0-20169 500 mm

One of the cheapest wood hacksaws. Its cost is about 600 rubles. The teeth are hardened, and their pitch is 11. Equipped with a fixed handle. With a length of 500 mm, only wood is processed. The saw with hardened teeth received a longitudinal-transverse direction. There is also a 3D sharpening function.

BLACK + DECKER BDHT0-20169 500 mm

STANLEY JETCUT 2-15-595 450 mm

Small teeth allow the most accurate cut. Also processes wood. Tooth pitch 11 points. The hardened teeth received a longitudinal-transverse direction. A fixed handle adds durability. Blade length 450 mm. The price is within 1000 rubles.

STANLEY JETCUT 2-15-595 450 mm

BISON Professional 15154-250 250 mm

Great for hiking. Web length 250 mm. This is optimal for small jobs. It can process laminate, wood and plastic. Will cost only 450 rubles. Ideal for tourists.

BISON Professional 15154-250 250 mm

Vira 800 240 400 mm

A fixed handle and a 3 D sharpening function is a typical feature of modern hacksaws.Suitable for smooth and accurate work. Designed for wood processing only. A 400 mm long blade is suitable for small and medium sized jobs. The direction is transverse. The price is 450 rubles.

Vira 800 240 400 mm

STANLEY JETCUT 2-15-281 380 mm

Belongs to the category of new products. Cutting direction: longitudinally-transverse. Hardened teeth handle wood. Web length 380 mm. The price is within 950 rubles. Tooth pitch 7 points.

STANLEY JETCUT 2-15-281 380 mm

Kraftool Katran Precision Cut 1-15194-18-22 185 mm

Carries out a cut of a tree, plastic and a laminate. There is also a 3 D sharpening function. Web length 185 mm. The price starts from 720 rubles. The direction of the saw is longitudinal and transverse. Suitable for hiking or trimming small branches in the garden.

Kraftool Katran Precision Cut 1-15194-18-22 185 mm

JCB JSW002 550 mm

This model is equipped with the longest canvas of the presented models in the ranking. Its length is 550 mm. The fixed handle with a rubberized insert contributes to comfortable work. It can process materials of a sufficiently large diameter and thickness. Tool steel preventing possible spring action. Such an instrument will cost 600 rubles.

JCB JSW002 550 mm

Gross Piranha 24100 450 mm

It processes wood, plastic and laminate. Included is one canvas. Its length is 450 mm. The longitudinal direction of the saw is provided by hardened teeth. A fixed handle and the possibility of 3 D sharpening play an important role. The tooth pitch is 7-8 points. The cost of an instance is 1100 r.

Gross Piranha 24100 450 mm

STANLEY Fatmax 0-20-556

A miniature hacksaw will be indispensable in tourism and farming. The length of the entire tool is 302 mm. Outwardly resembles an ordinary knife, but differs by the presence of teeth. Sliding in the hand prevents a reliable rubberized handle. Best suited for cutting drywall or thin plywood. The price is in the middle range for such an instrument. Will cost 1200 p.

Bahco 2600-16-XT11-HP

Universal model for cross cutting. This is one of the best ranking models. Many are affected by the long-term sharpness of the teeth. Friction during operation reduces the low friction coating. Such a protective layer reduces the degree of heating of the canvas, and also protects against corrosion. Unfortunately, the slice quickly begins to blacken. Such a model is worth 1500 p.