13 best well submersible pumps

To provide water to a private house or cottage, many people resort to using submersible pumps. They are devices that from a well or well supply water to a house, as well as to irrigate plants. The comfort of living in the house depends on the quality of the device. There are several types of aggregates that have their own specific application and their own characteristics. To answer the question of which submersible pump is best to choose for a well, it is necessary to consider the best models in different categories.

Design and principle of operation

The design of the submersible device may vary, depending on its type. But all devices operate in approximately the same way. Through the intake holes water comes from the source, and then under the action of force is pushed through the hose.

A feature of the submersible pump is that its design must be protected from water entering the motor. This is ensured by the use of various seals.

Submersible pump

The main types of submersible well pumps

There are several types of submersible devices:

• vibrating;
• screw;
• centrifugal;
• vortex.

A vibration pump is an assembly that operates by an internal diaphragm. This diaphragm absorbs water, which leads to the activation of the electromagnetic field. The movement of this field and the subsequent expulsion of water begins.

In a screw, the liquid is displaced by a special rotor rotating in the stator. The power of the pump depends on the number of such systems in the unit.

Centrifugal apparatuses are based on the operation of a wheel with blades. They are considered the most suitable for use even in polluted waters.

The vortex unit operates using the vacuum created by the wheel. Water enters the vortex cavity and begins to move much faster than a good pressure is provided. But vortex is better not to use in contaminated sources.

In a separate group, automated pumps are allocated. Such aggregates may be any of the listed types. As a rule, these are the best submersible pumps for wells. A distinctive feature is almost complete autonomy. The devices have a large number of sensors that monitor the operation of the device itself, as well as the water level in the well. When connected to an automated accumulator device, a kind of pumping station is obtained.

The following rating will help you decide which pump is best to choose.

Best vibrating pumps

Technopribor Brook-1M 40 m

Technopribor Brook-1M 40 m

Opens the rating of well pumps an excellent unit, as if returning from the Soviet past. A power of 0.225 kW is enough for most tasks that an apparatus of this class should perform. Productivity 7 L per minute. Reliable assembly and the absence of difficulties with the purchase of spare parts make this unit an indispensable tool for summer residents and owners of private houses.

Price: 1 900 - 2 200 rubles.

LIVHYDROMASH Kid BV 0.12-40-U5 16 m

LIVHYDROMASH Kid BV 0.12-40-U5 16 m

A well-known unit that has long established itself as a reliable and efficient device. Very low price, low power consumption and compact size make the unit one of the most popular for everyday needs. Great for watering.

Price: 1 700 - 2 000 rubles.

UNIPUMP BOWLENC 2 BV-024-40-U5

UNIPUMP BOWLENC 2 BV-024-40-U5

One of the best vibration pumps, which is the product of the connection of two units. The result is a more productive design that draws water from two ends. Reliability criteria for her are exactly the same as in previous models. But the problem with excessive vibration noticeably worsened. Whether to put up with this for the sake of productivity, everyone decides for himself.

Price: 4,500 - 5,000 rubles.

Top screw pumps

Unipump ECO VINT

Unipump ECO VINT

Budget screw pump of a very small diameter (less than 80 mm). The work is practically not accompanied by noise. Unpretentious and perfectly repaired. Spare parts can be purchased at any relevant store. However, for this unit they are very rarely required.

Price: 4,000 - 7,000 rubles.

Belamos TF3-60

Belamos TF3-60

An inexpensive device that can be used as a pump for wells and for wells. Large immersion depth: up to 80 meters. The reliable design allows you to use it for a long time without worries about fixing it. Repairing the word is also not complicated. All parts are for sale. Belamos TF3-60 - the answer to the question: which pump for a deep well is best to choose?

Price: 9,000 - 12,000 rubles.

Top Centrifugal Pumps

Pedrollo NKm 2/2 - GE

Pedrollo NKm 2/2 - GE

One of the best submersible pumps from the Italian manufacturer. Reliable assembly, coupled with low power consumption make it very popular among summer residents. The pump is also capable of letting a certain amount of contaminated water through itself, so that it will not need to be cleaned after several uses. Power is small, but for most wells it is quite sufficient.

Price: 33 000 - 35 000 rubles.

Grundfos SB 3-35 M

Grundfos SB 3-35 M

Very powerful well pump for reasonable money. Manufacturers were able to create a universal apparatus that can provide water not only to all residents of the house, but also leave it to water plants. A power of 0.8 kW is more than enough for such purposes. Productivity from 30 meters can reach 20 liters per minute.

Price: 16,000 - 19,000 rubles.

GARDENA 5500/5 Inox Premium

GARDENA 5500/5 Inox Premium

The device is of Chinese assembly, which has very good characteristics. Unit power 0.85 kW. Such power should be enough to fully supply water to a large house with several people. Water can also be allocated for irrigation without damage to residents. But protection from dry work will need to be bought on its own, since work without it is unacceptable.

Price: 20,000 - 21,000 rubles.

BELAMOS KF 80

BELAMOS KF 80

The Chinese unit, which is great for deep wells and wells. There is enough power to get water from a depth of up to 70 meters. The unit contains all the necessary functions, including protection against idling. Low price, coupled with excellent functionality make this model very attractive to customers. However, it is worth considering that for a low price you will have to pay with quickly failing seals.

Price: 9,000 - 10,000 rubles.

UNIPUMP ECO FLOAT-3

UNIPUMP ECO FLOAT-3

The device is a middle class, which is perfect for most tasks, including downhole. He can easily pump water from a great depth, and provide it with a big house. It tolerates contaminated water, which makes it possible to use it even in muddy wells.

Price: 10,000 - 12,000 rubles.

Best vortex pumps

Aquatic 777311

Aquatic 777311

Submersible pump with a diameter of 110 mm. It has an engine with a power of 0.750 kW. The device will perfectly cope with both cold and hot water. But it is undesirable to exceed the border of 35 degrees. The case is made of stainless steel.

Price: 1000 - 1500 rubles.

Best Automated Submersible Well Pumps

Grundfos SBA 3-45 A

Grundfos SBA 3-45 A

The best machine that is going to Italy. This is a very functional unit, equipped with all the necessary components. It turns on only at the time of water intake. Included is a float water level sensor. This is very useful for not very capacious wells. The sensor will quickly respond to a decrease in the water level below the limit and turn off the motor.

Price: 24,000 - 27,000 rubles.

DAB DIVERTRON 1200 M

DAB DIVERTRON 1200 M

Another automatic unit that is able to work completely autonomously. The necessary sensors monitor all parameters that affect the water supply. The functionality is about the same as the previous model, but the case is made of plastic. This significantly reduces the resource of the product.

Price: 20 000 - 20 500 rubles.